ABB REB500 - Event Text Configuration; HMI Leds

Section 3 1MRK 500 124-UEN
HMI500
54 Operation Manual
Distributed busbar protection REB500
3.6.5 Event text configuration
In this window all the event signals configured for REB500 are displayed. For each
event signal a user specific text can be defined (maximal 32 characters). The user
can sort the list as per ABB reference or the standard text.
Figure 41 Event text configuration
3.6.6 HMI LEDs
This dialog contains the list of bay units and the central unit (“LMI LED
configuration”). The unit specific configuration dialog (“LED statuses on the local
HMI”) is opened by selecting the desired bay unit or central unit with the left
mouse button and then clicking on “Continue” or directly by simply double
clicking on the unit line.