ABB rec670 - Ordering for Pre-Configured IED

25. Ordering for pre-congured IED
GUID-25AF8847-411F-4F1D-91ED-0ED71C5AA8A1 v12
Guidelines
Carefully read and follow the set of rules to ensure problem-free order management.
Please refer to the available functions table for included application functions.
PCM600 can be used to make changes and/or additions to the delivered factory configuration of the pre-configured.
To obtain the complete ordering code, please combine code from the tables, as given in the example below.
Example code: REC670 *2.2-A30X00- A02H02-B1A3-AC-CA-B-A3X0-CDAB1RGN1N1XXXXXXX-KKKXXHKKLAGXSY. Using the code of each position #1-11
specified as REC670*1-2 2-3 3-4 4-5 6-7 7-8-9 9 9-10 10 10 10 10 10 10 10-11 11 11 11 11 11 11 11 11 11 11
# 1 - 2 - 3 - 4 - 5 6 - 7 - 8 - 9 -
REC670* 2.2 - - - - - - - -
10 - 11
-
Position
SOFTWARE #1 Notes and rules
Version number
Version no.
2.2
Selection for position #1
Conguration alternatives Ordering no #2 Notes and rules
Single breaker 1MRK004004-AG A30
Double breaker 1MRK004004-BG B30
1 1/2 breaker diameter 1MRK004004-CG C30
Single breaker, with PMU 1MRK004004-EG D30
ACT configuration
ABB standard configuration X00
Selection for
position #2
1MRK 511 404-BEN A
Bay control REC670 2.2
Product version: 2.2.1
ABB 127