ABB rec670 - External Resistor Unit; Combiflex; Configuration and Monitoring Tools; Manuals

External resistor unit
SEMOD120228-4 v8
High impedance resistor unit with resistor and voltage dependent resistor 20-100V, 1ph Quantity:
1 2 3
RK 795 101-MA
High impedance resistor unit with resistor and voltage dependent resistor 20-100V, 3ph Quantity: RK 795 101-MB
High impedance resistor unit with resistor and voltage dependent resistor 100-400V, 1ph Quantity:
1 2 3
RK 795 101-CB
High impedance resistor unit with resistor and voltage dependent resistor 100-400V, 3ph Quantity: RK 795 101-DC
Combiex
IP15161-1 v1
Key switch for settings
SEMOD130356-4 v6
Key switch for lock-out of settings via LHMI Quantity: 1MRK 000 611-A
Note: To connect the key switch, leads with 10 A Combiflex socket on one end must be used.
SEMOD130267-5 v6
Mounting kit Ordering number
Side-by-side mounting kit Quantity: 1MRK 002 420-Z
Conguration and monitoring tools
IP15162-1 v2
M15042-3 v4
Front connection cable between LHMI and PC Quantity: 1MRK 001 665-CA
SEMOD131414-4 v3
LED Label special paper A4, 1 pc Quantity: 1MRK 002 038-CA
LED Label special paper Letter, 1 pc Quantity: 1MRK 002 038-DA
Manuals
M15161-3 v13
Note: One (1) IED Connect USB flash drive containing user documentation (Operation manual, Technical
manual, Installation manual, Commissioning manual, Application manual and Getting started guide),
Connectivity packages and LED label template is always included for each IED.
Rule: Specify additional quantity of IED Connect USB flash drive requested
. Quantity: 1MRK 002 290-AE
1MRK 511 404-BEN A
Bay control REC670 2.2
Product version: 2.2.1
134 ABB