ABB rec670 - Page 23

IEC 61850 or
function name
ANSI Function description Bay control
REC670
(Customized)
REC670 (A30)
REC670 (B30)
REC670 (C30) REC670 (D30)
BinSignTrans1_1
BinSignTrans1_2
BinSignTransm2
Binary signal transfer transmit 3/3/6 3/3/6 3/3/6 3/3/6 3/3/6
BinSigRec1_12M
BinSigRec1_22M
BinSigTran1_12M
BinSigTran1_22M
Binary signal transfer, 2Mbit receive/
transmit
3 3 3 3 3
LDCMTRN Transmission of analog data from LDCM 1 1 1 1 1
LDCMTRN_2M Transmission of analog data from LDCM,
2Mbit
6 6 6 6 6
LDCMRecBinStat1
LDCMRecBinStat2
LDCMRecBinStat3
Receive binary status from remote LDCM 6/3/3 6/3/3 6/3/3 6/3/3 6/3/3
LDCMRecBinS2_2M Receive binary status from LDCM, 2Mbit 3 3 3 3 3
LDCMRecBinS3_2M Receive binary status from remote LDCM,
2Mbit
3 3 3 3 3
Scheme communication
ZCPSCH 85 Scheme communication logic with delta
based blocking scheme signal transmit
0-1 1-K01 1-K01 1-K01 1-K01
ZCRWPSCH 85 Current reversal and weak-end infeed logic
for distance protection
0-1 1-K01 1-K01 1-K01 1-K01
ZCLCPSCH Local acceleration logic 0-1 1-K01 1-K01 1-K01 1-K01
ECPSCH 85 Scheme communication logic for residual
overcurrent protection
0-1 1-C51 1-C52 1-C53 1-C51
ECRWPSCH 85 Current reversal and weak-end infeed logic
for residual overcurrent protection
0-1 1-C51 1-C52 1-C53 1-C51
Table 8. Number of function instances in Synchrophasor report, 8 phasors
Function name
Function description Number of instances
PMUCONF Configuration parameters for C37.118 2011 and IEEE1344 protocol 1
PMUREPORT Protocol reporting via IEEE 1344 and C37.118 1
PHASORREPORT1 Protocol reporting of phasor data via IEEE 1344 and C37.118, phasors 1-8 1
ANALOGREPORT1 Protocol reporting of analog data via IEEE 1344 and C37.118, analogs 1-8 1
BINARYREPORT1 Protocol reporting of binary data via IEEE 1344 and C37.118, binary 1-8 1
SMAI1–SMAI12 Signal matrix for analog inputs 1
3PHSUM Summation block 3 phase 6
PMUSTATUS Diagnostics for C37.118 2011 and IEEE1344 protocol 1
1MRK 511 404-BEN A
Bay control REC670 2.2
Product version: 2.2.1
ABB 23