Contents
1. Description..................................................................... 3
2. Standard configurations................................................. 3
3. Protection functions......................................................12
4. Application................................................................... 12
5. Supported ABB solutions............................................. 14
6. Control......................................................................... 16
7. Measurements............................................................. 17
8. Power quality................................................................17
9. Fault location................................................................17
10. Disturbance recorder...................................................17
11. Event log..................................................................... 17
12. Recorded data............................................................ 18
13. Condition monitoring .................................................. 18
14. Trip-circuit supervision.................................................18
15. Self-supervision...........................................................18
16. Current circuit supervision........................................... 18
17. Protection communication and supervision................. 18
18. Access control............................................................ 19
19. Inputs and outputs...................................................... 19
20. Station communication................................................20
21. Technical data.............................................................25
22. Local HMI....................................................................57
23. Mounting methods...................................................... 58
24. Relay case and plug-in unit......................................... 58
25. Selection and ordering data.........................................58
26. Accessories and ordering data.................................... 59
27. Tools...........................................................................59
28. Cyber security............................................................. 60
29. Terminal diagrams.......................................................61
30. Certificates.................................................................. 65
31. References..................................................................65
32. Functions, codes and symbols.................................... 66
33. Document revision history........................................... 70
Disclaimer
The information in this document is subject to change without notice and should not be construed as a commitment by ABB. ABB assumes no responsibility for any errors
that may appear in this document.
© Copyright 2015 ABB.
All rights reserved.
Trademarks
ABB and Relion are registered trademarks of the ABB Group. All other brand or product names mentioned in this document may be trademarks or registered trademarks
of their respective holders.