ABB REF611 - Page 113

OSWGAPC2
IN_1
IN_2
IN_3
IN_4
IN_5
IN_6
IN_7
IN_8
IN_9
IN_10
IN_11
IN_12
IN_13
OUT
EFLPTOC1_OPERATE
EFLPTOC2_OPERATE
NSPTOC2_OPERATE
PDNSPTOC1_OPERATE
T1PTTR1_OPERATE
PHLPTOC1_OPERATE
CCBRBRF1_TRRET
PHIPTOC1_OPERATE
EFHPTOC1_OPERATE
EFIPTOC1_OPERATE
NSPTOC1_OPERATE
PHHPTOC2_OPERATE
PHHPTOC1_OPERATE
TRPPTRC 2_OPERATE
Master trip 2
IN_14
CBPSOF1_OPERATE
GUID-239E2970-724D-47ED-9C11-8F00BB329EEB V2 EN
Figure 87: OSWGAPC2
Start OSWGAPCs
OSWGAPC instances 3...6 are used to configure the protection start signals. These
four OSWGAPCs have the same inputs from the protection function start signals. The
output is routed to SELGAPC3 via the TPGAPC timer and to SELGAPC4 directly.
1MRS757456 D Section 3
REF611 standardized configurations
REF611 107
Application Manual