ABB REF611 User Manual

X100 SO1
X100 SO2
COMMON ALARM INDICATION 1 & 2
OSWGAPC3
OR
OUT
OSWGAPC7
OR
OUT
SELGAPC3
OUT_3
IN_5
OUT_4
IN_9
TPGAPC1
IN1
OUT1
TPGAPC3
IN1
OUT1
DPHLPDOC1_START
DPHLPDOC2_START
DPHHPDOC1_START
PHIPTOC1_START
DEFLPDEF1_START
DEFLPDEF2_START
DEFHPDEF1_START
ROVPTOV1_START
NSPTOC1_START
NSPTOC2_START
PDNSPTOC1_START
ROVPTOV2_START
ROVPTOV3_START
EFHPTOC1_START
INTRPTEF1_START
IN_1
IN_2
IN_3
IN_4
IN_5
IN_6
IN_7
IN_8
IN_9
IN_10
IN_11
IN_12
IN_13
IN_15
IN_14
DPHLPDOC1_OPERATE
DPHLPDOC2_OPERATE
DPHHPDOC1_OPERATE
PHIPTOC1_OPERATE
DEFLPDEF1_OPERATE
DEFLPDEF2_OPERATE
DEFHPDEF1_OPERATE
ROVPTOV1_OPERTAE
NSPTOC1_OPERATE
NSPTOC2_OPERATE
PDNSPTOC1_OPERATE
ROVPTOV2_OPERTAE
ROVPTOV3_OPERTAE
EFHPTOC1_OPETATE
INTRPTEF1_OPERATE
IN_1
IN_2
IN_3
IN_4
IN_5
IN_6
IN_7
IN_8
IN_9
IN_10
IN_11
IN_12
IN_13
IN_15
IN_14
GUID-30C0F21B-A880-469F-9B00-D8D00A752A20 V2 EN
Figure 116: Common alarm indication
The signal outputs from the protection relay are connected to give dedicated
information.
• Start of any protection function SO1 (X100:10-12)
• Operation (trip) of any protection function SO2 (X100: 13-15)
TPGAPC functions are timers and they are used for setting the minimum pulse length
for the outputs. There are seven generic timers (TPGAPC1…7) available in the
protection relay.
Section 3 1MRS757456 D
REF611 standardized configurations
136 REF611
Application Manual

ABB REF611 Specifications

General

Brand	ABB
Model	REF611
Category	Protection Device
Language	English