Low limit for transmission of measured values
High limit for transmission of measured values
Parameter activation
(Station-specific parameter, mark with an “X“ if the function is only used in the
standard direction, “R“ if only used in the reverse direction, and “B“ if used in both
directions.)
Act/deact of persistent cyclic or periodic transmission of the addressed object
Test procedure
(Station-specific parameter, mark with an “X“ if the function is only used in the
standard direction, “R“ if only used in the reverse direction, and “B“ if used in both
directions.)
Test procedure
File transfer
(Station-specific parameter, mark with an “X“ if the function is used.)
File transfer in monitor direction
Transparent file
Transmission of disturbance data of protection equipment
Transmission of sequences of events
Transmission of sequences of recorded analogue values
File transfer in control direction
Transparent file
Background scan
(Station-specific parameter, mark with an “X“ if the function is only used in the
standard direction, “R“ if only used in the reverse direction, and “B“ if used in both
directions.)
Background scan
Acquisition of transmission delay
(Station-specific parameter, mark with an “X“ if the function is only used in the
standard direction, “R“ if only used in the reverse direction, and “B“ if used in both
directions.)
Acquisition of transmission delay
IEC 60870-5-104 interoperability 2NGA001859 A
46 REX615
IEC 60870-5-104 Communication Protocol Manual
To Next Page
Loading...
