ABB Relion - Page 51

SELGAPC1
ISWGAPC1
Blocking 1
PHPTOV1_BLOCK
PHPTOV2_BLOCK
PHPTOV3_BLOCK
PHPTUV1_BLOCK
PHPTUV2_BLOCK
PHPTUV3_BLOCK
ROVPTOV1_BLOCK
ROVPTOV2_BLOCK
ROVPTOV3_BLOCK
NSPTOV1_BLOCK
NSPTOV2_BLOCK
PSPTUV1_BLOCK
PSPTUV2_BLOCK
FRPFRQ1_BLOCK
FRPFRQ2_BLOCK
X130-BI1
X130-BI2
X130-BI3
ISWGAPC2
Blocking 2
PHPTOV1_BLOCK
PHPTOV2_BLOCK
PHPTOV3_BLOCK
PHPTUV1_BLOCK
PHPTUV2_BLOCK
PHPTUV3_BLOCK
ROVPTOV1_BLOCK
ROVPTOV2_BLOCK
ROVPTOV3_BLOCK
NSPTOV1_BLOCK
NSPTOV2_BLOCK
PSPTUV1_BLOCK
PSPTUV2_BLOCK
FRPFRQ1_BLOCK
FRPFRQ2_BLOCK
X130-BI4
GUID-061E1E21-E166-4597-99F7-4770E336775A V1 EN
Figure 26: Binary inputs
SELGAPC1
SELGAPC1 has inputs from protection relay binary inputs. IN_1...IN_4 are binary
inputs from X130. An always true signal is connected to IN_5. SELGAPC1 outputs
are used to route inputs to different functions. Binary inputs can be configured for
different purposes by setting SELGAPC1.
1MRS758335 B Section 3
REU611 standardized configuration
REU611 45
Application Manual