83
Table footnotes from previous page
a)
If the input is out of operation or the optional RTD module has not been installed, the value -32768 will be returned.
b)
If the input is out of operation or the optional RTD module has not been installed, the value 655 will be returned.
Table 5.1.14.1.-8 Mapping of Modbus data: digital data
Description HR/IR address
(.bit)
DI/Coil bit
address
Writeable Value range Comment
Motor start up 417.00 1 0/1 1 = begins
0 = ends
Motor start up CD 417.01 2
Pickup signal from element 49 417.02 3 0/1 1 = activated
Pickup signal from element 49 CD 417.03 4
Alarm signal from element 49 417.04 5 0/1 1 = activated
Alarm signal from element 49 CD 417.05 6
Trip signal from element 49 417.06 7 0/1 1 = activated
Trip signal from element 49 CD 417.07 8
Restart disable signal from element 49 417.08 9 0/1 1 = activated
Restart disable signal from element 49
CD
417.09 10
Restart disable signal from element 66 417.10 11 0/1 1 = activated
Restart disable signal from element 66
CD
417.11 12
Restart disable 417.12 13 0/1 1 = activated
a)
Restart disable CD 417.13 14
Pickup signal from element (48/14
PICKUP)
2
x (48/14 TDLY) or 48/14
417.14 15 0/1 1 = activated
Pickup signal from element (48/14
PICKUP)
2
x (48/14 TDLY) or 48/14 CD
417.15 16
Trip signal from element (48/14
PICKUP)
2
x (48/14 TDLY) or 48/14
418.00 17 0/1 1 = activated
Trip signal from element (48/14
PICKUP)
2
x (48/14 TDLY) or 48/14 CD
418.01 18
Pickup signal from element 50P-1 418.02 19 0/1 1 = activated
Pickup signal from element 50P-1 CD 418.03 20
Trip signal from element 50P-1 418.04 21 0/1 1 = activated
Trip signal from element 50P-1 CD 418.05 22
Pickup signal from element 37 418.06 23 0/1 1 = activated
Pickup signal from element 37 CD 418.07 24
Trip signal from element 37 418.08 25 0/1 1 = activated
Trip signal from element 37 CD 418.09 26
Pickup signal from element 51N 418.10 27 0/1 1 = activated
Pickup signal from element 51N CD 418.11 28
Trip signal from element 51N 418.12 29 0/1 1 = activated
Trip signal from element 51N CD 418.13 30
Pickup signal from element 46 418.14 31 0/1 1 = activated
Pickup signal from element 46 CD 418.15 32
Trip signal from element 46 419.00 33 0/1 1 = activated
Motor Protection Relay
Technical Reference Manual - ANSI Version
REM 610REM 610
1MRS755537
To Next Page
Loading...
