Figure 2: Checking the ordered products and deliverables
3.2.4 Returning a product damaged in transit
If damage has occurred during transport, appropriate actions must be taken
against the latest carrier. Please inform the nearest ABB office or representative.
Notify ABB immediately if there are any discrepancies in relation to the delivery
documents.
3.3 Storing
If the products are stored before installation, it must be done in the original
transport casing in a dry and dust free place.
Observe the environmental requirements stated in the Technical Manual of REX615.
4TLB000504 A
Unpacking, inspection and storing
Installation Manual
17
To Next Page
Loading...
