ABB REX615 - Connecting the REX615 Relay; Tools Required for Connection

5 Connecting
5.1 Required tools
Refer to the REX615 Installation Manual
Only use a screwdriver and insert bits for Phillips (PH 1) cross-recessed head screws
(M3.5) when handling CT/ VT terminals of screw-compression type.
A
B
A Max. ø5.5 mm (0.22 inches)
B Max. ø5 mm (0.20 inches)
Figure 20: Screwdriver for CT/VT terminals of screw-compression type
A
A Min. 15 mm (0.59 inches)
Figure 21: Insert bits for CT/VT terminals of screw-compression type
Connecting
4TLB000504 A
30
Installation Manual