ABB | SACE Emax 2
Management operations | 3 - Description19 | © 2019 ABB | 1SDH001000R0002 - ECN000109166 - Rev. D
Continued from the previous page
5. Unlatch the tongue and remove the lifting plates from the moving part. See Figure 40.
1
2
3
Figure 40
6. Make sure that the signalling device indicates the DISCONNECT position. See Figure 41.
Figure 41
7. Grip the guide levers of the fixed part and push them until the moving part stops. See Figure 42.
Figure 42
Continued on the next page
To Next Page
Loading...
