ABB SACE PR010/T - Relay Data and Programming; Protection Parameters Display; Trip History Logging; General Relay Information

ABB SACE ABB SACE PR010/T RH0029002 L4408 12/29
29
2.3.3 Protections
The parameters of the main relay protections are displayed in this section.
Use the  and  keys of ENTER to scroll the sections.
2.3.4 Trip history
This section contains the data stored during the last tripping action of the relay, such as the current
readings, tripping protection and the total number of trips.
The PR223EF and PR223DS relays can store up to 20 historic data items. Use the  and  keys
or ENTER to scroll the records.
2.3.5 General information
This section contains data such as the name of the relay, the SW release and the serial number.
2.4 Programming
The data that can be configured with the ACE relays are given in the table below.
PR111 PR111/VF PR112 PR113 PR212 PR212MP PR222 PR222MP PR223EF PR223DS
PROGRAMMING
Parameters/
Configuration
(1)
XXXXXXXX
Protections
XXX
(2) X(2) X(2) X(2) XX
NOTES
1
For PR010/T unit SW releases up to 7.5, the settings can also be programmed in the DEFAULT
configuration in the operating mode and the test parameters in the DEFAULT configuration)
2
The protection parameters can be programmed in the ELT configuration
RH0029002.book Page 12 Thursday, May 5, 2011 12:14 PM