ABB SACE ABB SACE PR010/T RH0029002 L4408 15/29
29
3.2 Operating mode menu
All the relays in the previous chapter share the same menu structure in PR010/T units. They also
partly or fully share certain functions and characteristics.
Considering the main menus, all the units allow access to the following menus:
• Test: test of the protections, trip mechanism and high signals.
• Measuring: monitoring of the currents and other runtime values of the relay.
• History: historic reading of trips and other stored measurements.
• Setting configuration: modifies the characteristic parameters of the relay.
• Protection configuration: modifies the protection thresholds and parameters.
• Information: reading of the characteristic information of the CB unit and relay.
• Status: presence of alarms (if any).
• Installation: installation and disinstallation of a new relay in the CB.
3.3 Test
The Test menu cannot be accessed if there is an alarm or if the circulating
current is not nil.
PR121/P
PR122/P
PR123/P
PR331/P
PR332/P
PR333/P
PR232/P (1)
PR122DC
PR123DC
TEST
Automatic
XXXXXXXXX
Manual
XXXXXXXXX
Trip Test
XXXXXXXXX
Module sign.
(2)
XXXXX XX
S and G selectivity
(3)
XX XX XX
Rc
(4)
XX XX
NOTES
1
Relays PR232/P and PR232/P-T8 share the same settings and types of controls in PR010/T
2
The note refers to modules PR120/K (for relays PR122 and PR123), and contact S51/P1 (for relay
PR33x)
3
Test only possible for relay versions with protections S and/or G
4
Test only possible if the Rc sensor is connected
RH0029002.book Page 15 Thursday, May 5, 2011 12:14 PM
To Next Page
Loading...
