ABB SafePlus User Manual

3
15 Operation 26
15.1 Operation of cable switch 26
15.2 Operation of vacuum circuit-breaker 27
15.3 Operation of vacuum circuit-breaker 12kV/25kA, 24kV/20kA 28
15.4 Operation of fuse-switch disconnector 29
15.5 Installation and replacement of fuses 29
15.6 Fuse selection tables 31
15.6.1 Fuse selection table - CEF 31
15.6.2 Fuse selection table - CEF-S 32
16. Metering module 33
17. Capacitive voltage indicators 34
17.1 Voltage indicators VPIS 34
17.2 Voltage indicators VDS 35
17.3 Voltage indicators VDS-LRM 35
18. Additional equipment 36
18.1 Low-voltage connections 36
18.2 Remote control and monitoring unit 36
19. Cable testing 37
19.1 Procedure for switchgear with test points 37
19.2 Procedure for testing directly on the cable 38
connector with the cable connected to
the switchgear
19.3 Procedure for testing directly on the cable 38
connector with the cable disconnected from
the switchgear
20. Service and maintenance 39
20.1 General warnings and cautions 39
20.2 Maintenance intervals 39
20.3 Inspection 39
20.4 Servicing 40
20.5 Repairs 40
20.6 Tool list SafeRing/SafePlus 41
21. Environmental certification 42
21.1 Life expectancy of product 42
21.2 Recycling capability 42
21.3 End-of-life 42

ABB SafePlus Specifications

General

Rated voltage	Up to 24 kV
Rated current	Up to 1250 A
Insulation medium	SF6 gas
Rated Lightning Impulse Withstand Voltage	125 kV
Standards	IEC 62271-200
Dimensions	Varies by configuration
Weight	Varies by configuration
Short-time withstand current	Up to 25 kA