IEC18000108 V1 EN-US
Figure 5: PCM600: SAM600 system insertion
It is possible to drag a SAM600 system from the Object Types window to
the Bay level.
3. Select the Online Configuration radio button, See Figure 6
IEC18000109 V1 EN-US
Figure 6: PCM600: Configuration mode selection wizard
4. Select USB from the IED protocol drop-down list, see Figure 7.
For SAM600, only USB IED protocol is supported.
Section 4 1MRK 511 433-UEN B
Setting up a project
14 SAM600 Process Bus I/O System
Engineering manual
© Copyright 2017 ABB. All rights reserved
To Next Page
Loading...
