IEC18000110 V1 EN-US
Figure 7: PCM600: Communication protocol selection wizard
5. Select the available port from the COM Port Selection drop-down list to configure, see
Figure 8.
The
Hardware Module ID
shows the serial number of the physically
SAM600 connected module. The
Hardware Module Type
indicates the
type of the physically connected SAM600 module.
IEC18000111 V1 EN-US
Figure 8: PCM600: Communication port selection wizard
Only SAM600 USB connections that are available will be shown in the
COM
Port Selection drop down list.
6. Click the Scan button to scan or read the SAM600 product version for a SAM600 system
that is online, see Figure 9.
1MRK 511 433-UEN B Section 4
Setting up a project
SAM600 Process Bus I/O System 15
Engineering manual
© Copyright 2017 ABB. All rights reserved
To Next Page
Loading...
