ABB SAM600 Series - Introduction; This Manual; Intended Audience; Document Revision History

Section 1 Introduction
1.1 This manual
GUID-37808C73-5FF6-4D6D-A413-95F2E720BD05 v1
The SAM600 operation manual provides information about the usage of a SAM600. The
manual contains instructions on how to configure, install and commission a SAM600 system
and on how to operate the system once it has been commissioned.
1.2 Intended audience
GUID-0FD08E01-B107-4F8F-8C3D-FDBE9CAF9293 v1
This manual addresses engineers and operators who configure, install, commission and
operate a SAM600 system. The user must be trained in and have a basic knowledge of how to
operate substation automation secondary system equipment. The manual contains terms and
expressions commonly used to describe this kind of equipment.
1.3 Document revision history
GUID-DF73222C-C15C-4961-B89A-0C30B78C8D12 v1
Document
revision
Date Product revision History
A 2017-06 1.2.0 First release for product version 1.2
B 2019-04 1.2.1 Document enhancement and corrections
1.4 Related documents
GUID-8348908E-52BA-4728-8044-B005FBC79560 v1
The following product documentation is available for the SAM600.
SAM600 Product documentation Document number
SAM600 Product Guide 1MRK 511 437-BEN
SAM600 Engineering Manual 1MRK 511 433-UEN
SAM600 Operation Manual 1MRK 511 434-UEN
SAM600 Cyber Security Deployment Guideline 1MRK 511 435-UEN
SAM600 Accessory List 1MRK 511 436-BEN
SAM600 Safety Leaflet 1KHL511872-UEN
SAM600-TS Wiring Diagram 1KHL511910
SAM600-VT Wiring Diagram 1KHL511911
SAM600-CT Wiring Diagram 1KHL511912
SAM600 1.2 PICS and PIXIT (IEC61580 Ed1) 1KHL516076
SAM600 1.2 MICS (IEC61850 Ed2) 1KHL516090
SAM600 1.2 IEC/IEEE 61850-9-3 PICS 1KHL516091
SAM600 1.2 TICS (IEC61850 Ed2) 1KHL516092
1MRK 511 434-UEN B Section 1
Introduction
SAM600 Process Bus I/O System 3
Operation Manual
© Copyright 2017 ABB. All rights reserved