ABB SAM600 Series - Labels, Connectors and Indications of SAM600 Modules; SAM600 Module Identification; Connector Diagrams; Sam600-Ct

To Next Page

To Previous Page

7.2 Labels, connectors and indications of SAM600

modules

7.2.1 SAM600 module identification

GUID-46C75D44-1072-4592-B9E7-2C8119E3B359 v1

All SAM600 modules carry a device label as depicted in Figure 15 allowing to identify a SAM600

module and its basic properties.

IEC18000525 V1 EN-US

Figure 15: SAM600-TS device label

Table 8 lists the details of the information printed on SAM600 labels.

Table 8: SAM600 device label properties

Label (Example) Description

SAM600 1.2-TS-DA-P2 SAM600 module order code.

See

SAM600 Product guide

for more details

P/N 1KHL150036R0110 SAM600 module part number

For internal ABB use only.

S/N PP19150003 SAM600 module serial number

A/N: 1KHL160060R1002G SAM600 module article number

For internal ABB use only.

7.2.2 Connector diagrams

GUID-971383B1-4316-4472-920E-B1A16FF874F9 v1

This section describes the connection interfaces of SAM600 modules, and the LED HMI.

7.2.2.1 SAM600-CT

GUID-D1032B85-0AE5-4BFD-9162-A9E481037F34 v1

SAM600-CT has four current measurement channels and digital inputs for auxiliary signal

supervision. Those channels are accessible via connectors X11-X14 and X10, respectively.

Figure 16 and Figure 17 depict the position and numbering of connectors of the SAM600-CT

module.

Section 7 1MRK 511 434-UEN B

Technical Data

40 SAM600 Process Bus I/O System

Operation Manual

Other manuals for ABB SAM600 Series