• De-energize the measurement equipment connected to the analog input connectors of
the SAM600 module
• Remove the SAM600 module’s power supply
• Unplug the digital inputs
• Remove the wiring from measurement equipment to the terminal blocks of the SAM600
module
• Remove the network cables from the SAM600 module
• On the SAM600-TS module remove all 1PPS and 1PPS out connections
• Remove the SAM600 module from its rail mounting
Disposing of SAM600 modules
SAM600 modules are electronic devices. While the modules are not hazardous, many countries’
environmental laws require special handling of old electronic appliances. SAM600 modules can
be returned to the vendor, who will properly handle the disposal. The return address can be
found in the documents accompanying the SAM600 module.
Section 4 1MRK 511 434-UEN B
Commissioning SAM600
34 SAM600 Process Bus I/O System
Operation Manual
© Copyright 2017 ABB. All rights reserved
To Next Page
Loading...
