3 - 18 WBPEEUI240751C0
I/O Block
Cable Connection
The clamp terminals can be removed from the C type base to
provide cable connection of field wiring. A cable with a plug-in
cable connector is used instead. This supports applications
that require a cable connection to external devices or termina-
tions that are part of a remote termination system (RTS).
Figure 3-14 shows the C type base with the clamp terminals
removed.
Figure 3-13. Terminal Markings (Door Removed)
I/O T ERM IN AL S
CHANNEL
ASSIGNM ENTS
LOCAL
FIELD POWER
CHASSIS
GROUND
T00963A
01 02
03 04
05 06
07 08
09 10
11 12
13 14
15 16
LFP
To Next Page
Loading...
