ABB Symphony Harmony Series - Analog Output Nomenclature; Control Input;Output Nomenclature

11 - 2 WBPEEUI240751C0
I/O and Auxiliary Block Nomenclature
Table 11- 2. An alog Output Nomenclature
1234567891011121314151617
P - H B - A O T - 1 5 0 _ _ _ _ _ Block Nomenclature - Current Out
Module/Base Option
0C1__Nonredundantcable/clampterminalbase
0C2__Redundantcable/clampterminalbase
0S1__Nonredundantscrewterminalbase
0S2__Redundantscrewterminalbase
100__I/Omodule
Reserved for Future Use
0 0 Must be zeros
Table 11- 3. Co ntrol Input/Outpu t Nomencla ture
1234567891011121314151617
P - H B - C I O - 1 0 0 _ _ _ _ _ Block Nomenclature - Control Loop
In/Out
Module/Base Option
1
0C1__Nonredundantcable/clampterminalbase
0S1__Nonredundantscrewterminalbase
100__I/Omodule
Reserved for Future Use
0 0 Must be zeros
P - H B - C I O - 1 1 0 0 0 0 0 0 Electric D rive/Pulse Positioner
Termination
2
NOTES:
1. Available in nonredundant configuration only. (AO bypass provided by optional manual/auto station (IISAC01).
2. Supports control stations that operate as electric drive/pulse positioner bypass stations. Ribbon cable NKCS04 is required to
connect CIO-110 to CIO-100.