ABB Symphony Harmony Series - P5 Communication Pins

8 - 14 WBPEEUI240751C0
I/O Block Connectors
CIO-100 (P7, P8)
Table 8-9 lists the pin assignments for the P7 station one con-
nector and the P8 station two connector of the CIO-100 block.
Table 8-8. P5 Communication Pins
Pin Connection Pin Connection
1 Ground 2 Clock A
3Ground 4DataA
5 Ground 6 SOA 1
7 +V1 8 +V2
9 SOA 2 10 Ground
11 Data B 12 Ground
13 Clock B 14 Ground
Table 8-9. CIO-100 P7 and P8 Co nnector Pins
Pin P7 P8
1LFP(–) LFP(–)
2 Serial link (–) Serial link (–)
3Notconnected Notconnected
4 Analog output 1 (–) Analog output 2 (–)
5 Analog input 2 (–) Analog input 4 (–)
6 Analog input 1 (–) Analog input 3 (–)
7Ground Ground
8LFP
1
(+) LFP
1
(+)
9Seriallink(+) Seriallink(+)
10 Not connected Not connected
11 Analog output 1 (+) Analog output 2 (+)
12 Analog output 1 (bypass) Analog output 2 (bypass)
13 Analog input 2 (+) Analog input 4 (+)
14 Analog input 1 (+) Analog input 3 (+)
NOTE:
1. Fused +24 VDC; one fuse for both connectors P7 and P8.