11 - 4 WBPEEUI240751C0
Cable Nomenclature
Cable Nomenclature
Tables 11-8 through 11-10 list cable nomenclature.
Table 11- 6. Auxiliary Relay Assembly Nom enclature
1234567891011121314151617
P - H B - R L Y - _ _ _ _ _ _ _ _ Block Nomenclature
Block Type
1 0 0 _ _ _ _ _ Electrome c hanical relay assembly
1,2
200_____Solid state relay assembly
1,3
Reserved for Future Use
0 0 0 0 0 Must b e zeros
NOTES:
1. Available in screw termination base style only.
2. RLY-100 is packaged with eight DPDT (form C) electromechanical relays.
3. RLY-200 is packaged unpopulated. Solid state relays are ordered separately. Refer to Table 11-12 for part numbers.
Table 11- 7. Blank Block Nome nclature
1234567891011121314151617
P - H B - B L K - 1 0 0 _ _ _ _ _ Block Nomenclature
1
Module/Base Option
001__Nonredundant base
002__Redundant base
100__Blank module
Reserved for Future Use
0 0 Must be zeros
NOTES:
1. Blank blocks maintain colum n air f low. They are only required in the middle of a column where air flow would be disrupted
with an e mpty column position. They are not required at the bottom of a column of blocks.
Table 11-8. DIO to RLY Cable Nomenclature
1234567891011121314151617
P - M K - H R M - R L Y 1 2 _ _ _ Cable Nomenclature
Cable Type
H _ _ PLTC rated for use in hazardous areas
S__Foruseinnonhazardousareas
Cable Length
0B0.6m(2ft)-connectsside-by-sideDIO
and RLY
xx01to60for1.0to60m(3.3to200ft)
To Next Page
Loading...
