WBPEEUI240751C0 PR18 - 1
PR18
RLY-100/200 Cable Connection
Purpose/Scope
This procedure gives the steps required to cable connect a
RLY-100 or RLY-200 block to a DIO-400 block (Fig. PR18-1).
NOTE: A DIO block must have a relay connector base (P-HB-DIO-4000R?00)
to connect DIO outputs to an RLY block.
Parts
To o l s
None.
Figure PR18-1. DIO to RLY Connection
5 min.
T02109B
RLY-100,
RLY-200
DIO-400
Number
1,2
Qty Description
P-MK-HRM-RLY12Hxx 1 DIO to RLY cable
P-MK-HRM-RLY12Sxx DIO to RLY cable
NOTES:
1. H = PLTC rated for use in external enclosure applications; S = for use in internal enclosure ap-
plications.
2. Refer to Section 11 for complete nomenclatures.
To Next Page
Loading...
