ABB Symphony Harmony Series - Page 97

1 - 6 WBPEEUI240751C0
Harmony Controllers
Table 1-2. I/O Block Capabilities
I/O Range/Type
AIN-120 AIN-200 AIN-220 AIN-300
AOT-150
CIO-100 DIO-400
DOT-100 DOT-120
Analog In
Current 4 to 20 mA •• •
High level VDC -10 to + 10 VDC ••• •
1
Low level V DC -100 to +100 mV ••
Thermocouple B, E, J, K, L, N (14/28 AWG), R, S, T, U,
Chinese E, S
••
3-wire RTD 10 Ω cop per
100 Ω pla tinum: U.S. Lab. Standard
100 Ω pla tinum: U.S. Industry Stan dard
100 Ω platinum: European Standard
120 Ω nickel
Chinese 53 Ω copper
•
Channels 16 16 16 16 4
Isolated •••
Analog Out
Current 4 to 20 mA ••
High level VDC 1 to 5 VDC •
Channels 16 2
Isolated
Digital In
24 VDC 19.5 to 28 VDC ••
48 VDC 39 to 56 VDC ••
125 VDC 95 t o 144 VDC ••
120 VAC 85 to 138 VAC ••
240 VAC 190 to 265 VAC ••
Channels 416
Isolated ••
Digital Out
Open collector 24 VDC at 250 mA ••
48 VDC at 250 m A •
SPDT EM relay 24, 48, 125 VDC ••
120, 240 VAC ••
Channels 481616
Isolated ••••
Supports redundant I/O electronics ••••• •••
NOTE:
1. 1 to 5 VDC only.