Operation Manual / TPL65-A10 / -A30
2 Safety / 2.6 Safe operation and maintenance
© Copyright 2020 . All rights reserved. HZTL2482_EN Rev.E March 2020
Safety during disassembly, assembly, maintenance and
troubleshooting
u Always perform the specified adjustments, servicing as well as in-
spection work and observe inspection intervals.
u Inform operating personnel about all service and repair work before
beginning.
u Before opening a cover or removing a protective device on a tur-
bocharger, the engine must be switched off and the turbocharger
must have come to a standstill.
u Ensure that the supply of oil is interrupted, especially with an external
oil supply.
u Put the engine into operation only after all parts have been refitted
properly.
CAUTION
Mechanical work on the turbocharger
Possible damage to or destruction of components on the turbocharger.
u Perform only those tasks that are described in this manual.
u Perform work only for which training has been carried out.
Safety when taking out of operation or preparing for mothballing
u Secure the rotor so it cannot turn. The rotor can turn on its own from
the force of the stack draught.
u Clean the turbocharger before mothballing it.
u Observe the material safety data sheet for the cleaning and moth-
balling agents.
u Wear personal protective equipment (PPE) according to the material
safety data sheet.
Page 20 / 117
To Next Page
Loading...
