ABB TPS 48D01 - 4.5 Stopping the engine

Operation Manual / TPS48-D/E.. - TPS61-D/E..
Op
eration
4
Stopping the engine
4.5
Page 54
April 2015 HZTL2410_EN Revision D
Stopping the engine
4.5
CAUTION
Stopping the engine of oil-cooled turbocharger version
Heat in the turbocharger must be dissipated by the further circulating
lubricating oil.
 Post-lubricate for 15 … 20 minutes.
 Maintain oil pressure of 0.5 … 1.0 bar for post-lubrication.
CAUTION
Stopping the engine of water-cooled turbocharger version
Heat in the turbocharger must be dissipated.
 Allow turbocharger cooling water to run for 15 … 20 minutes after
stopping engine.
 Allow oil lubrication to continue running until rotor comes to a stop.
Further post-lubrication is not required and not recommended.
4.5
© Copyright 2015 ABB. All rights reserved.