Operation Manual / TPS48-D/E.. - TPS61-D/E..
Safe operation and maintenance
Page 24
© Copyright 2016 ABB. All rights reserved.
September 2016 HZTL2410_EN Revision E
Safety during disassembly, assembly, maintenance and troubleshooting
Always perform the specified adjustments, servicing as well as inspec-
tion work and observe inspection intervals.
Inform operating personnel about all service and repair work before
beginning.
Before opening a cover or removing a protective device on a turbo-
charger, the engine must be switched off and the turbocharger must
have come to a standstill.
Ensure that the supply of oil is interrupted, especially with an external
oil supply.
Put the engine into operation only after all parts have been refitted
properly.
Mechanical work on the turbocharger
Possible damage to or destruction of components on the turbocharger.
Perform only those tasks that are described in this manual.
Perform work only for which training has been carried out.
Safety when taking out of operation or preparing for mothballing
Secure the rotor so it cannot turn. The rotor can turn on its own from
the force of the stack draught.
Clean the turbocharger before mothballing it.
Observe the material safety data sheet for the cleaning and mothball-
ing agents.
Wear personal protective equipment (PPE) according to the material
safety data sheet.
To Next Page
Loading...
Need help?
General
