ABB UMC100-FBP - Page 122

- 122 -UMC100-FBP
Universal Motor Controller
UMC100-FBP
Technical Description
FieldBusPlug / Issue: 03.2012
Para-
meter
Number
Parameter Description, Explanations Options Adjustable
via
106 Loc 2 start bus
cyclic
Allow the motor to be started
via cyclic bus command in
local mode 2
No (0),
Yes (1)
All
107 Loc 2 stop bus
cyc
Allow the motor to be stop-
ped via cyclic bus command
in local mode 2
No (0),
Yes (1)
110 Loc2 start LCD Allow the motor to be started
via LCD panel in local mode
2
No (0),
Yes (1)
111 Loc2 stop LCD Allow the motor to be stop-
ped via LCD panel in local
mode 2
No (0),
Yes (1)
112 Loc2 start bus
acyclic
Allow the motor to be started
via acyclic bus command in
local mode 2 (e.g. from DTM)
No (0),
Yes (1)
113 Loc2 stop bus
acyc
Allow the motor to be stop-
ped via acyclic bus com-
mand in local mode 2 (e.g.
from DTM)
No (0),
Yes (1)
108 Loc2 start DI Allow the motor to be started
via digital input in local
mode 2
No (0),
Yes (1)
109 Loc2 stop DI Allow the motor to be stop-
ped via digital input in local
mode 2
No (0),
Yes (1)
Auto Control Mode
98 Auto start bus
cyclic
Allow to start the motor via
cyclic bus command in auto
mode
No (0),
Yes (1)
All
99 Auto stop bus
cyclic
Allow to stop the motor via
cyclic bus command in auto
mode
No (0),
Yes (1)
102 Auto start LCD Allow to start the motor via
LCD panel in auto mode
No (0),
Yes (1)
103 Auto stop LCD Allow to stop the motor via
LCD panel in auto mode
No (0),
Yes (1)
104 Auto start Bus
Acyclic
Allow to start the motor via
acyclic bus command in auto
mode (e.g. from DTM)
No (0),
Yes (1)
105 Auto stop Bus
Acyclic
Allow to stop the motor via
acyclic bus command in auto
mode (e.g. from DTM)
No (0),
Yes (1)
100 Auto start DI Allow to start the motor via
digital input in auto mode
No (0),
Yes (1)
101 Auto stop DI Allow to stop the motor via
digital input in auto mode
No (0),
Yes (1)
Motor Management Parameters Continued