- 16 -UMC100-FBP
Universal Motor Controller
UMC100-FBP
Technical Description
V 6
FieldBusPlug / Issue: 03.2012
UMC100-PAN LCD Panel
The Control Panel UMC100-PAN is an accessory for the UMC100 and can be used for monitoring, control
and parameterisation of the UMC100. It can be directly plugged on the UMC100 or mounted separately
on the panel door using the mounting kit.
Some of the main features are:
- fully graphic, multi-language user interface
- start and stop of the motor and acknowledgement of faults.
- display of measured values (e.g. motor current in A/% or start-up time) and status of inputs and outputs
- parameterisation
The following diagram shows the UMC100-PAN with the monitoring and operating elements:
Context-sensitive key
Up key for navigation
Down key for navigation
Context-sensitive key
Start motor
Stop motor
LCD
LEDs
green RDY = Ready
yellow FWD/REV = Motor runing
red Fault = Faults
To Next Page
Loading...
