Installation and maintenance instructions UniGear type ZS2 UniSafe-36 1YTW571780-012 Rev:E 01-2005 en Page: 12 of 25
Below are guide-figures for busbars assembly.
Fig: 2.5.4
Fig: 2.5.5
Fig:2.5.6
Fig: 2.5.7
Fig:2.5.8
Fig:2.5.9
Main busbar 2500A, Circuit: 1600-2000-2500A
2500A Main busbars should be installed while panel erection. Otherwise access necessary both from the
busbar compartment and the CB compartment.
To Next Page
Loading...
