Calculation of second-level password (Service menu, Admin Plus)
In order to obtain the second-level password needed to access the
inverter's display service menu or to obtain the “Admin Plus” privileges
in the internal webserver, contact ABB Technical Sales (1-877-261-1374)
keeping the following information on hand:
- S/N - Serial number of the inverter. This information can be found on the
product label giving the identity details of the inverter or on the display by
accessing the “Inverter > Info > Serial No.”.
The serial number consists of 6 digits (the last 6 in models with a label
giving a 10-digit S/N)
- WK - Production week. This information can be found on the product
label giving the identity details of the inverter or on the display by
accessing the “Inverter > Info > Serial No.”.
The production week consists of 4 gures, indicating the week (rst 2
digits) and the year of production (last 2 digits)
- Update Version - This information is available only for some inverter
models and can be found on the display by accessing the menu
“Inverter > Info > Firmware”.
The password obtained enables access also to the advanced “Installer” mode present on the
conguration software for inverters (Aurora Manager LITE). The conguration software can
be downloaded in a specic section of the website www.abb.com/solarinverters.
Password 2°level
ENTER
Settings
Service
ENTER
Password 0000
ENTER
To Next Page
Loading...
