- 41 -
000634AG
Transport and handling
Protect the inverter from shocks, humidity, corrosive environments (e.g.
salt), vibration, etc during transport and handling.
During handling, do not make any sudden or fast movements that
can create dangerous swinging.
Lifting
Equipment used for lifting the inverter must be rated for its weight.
Do not lift more than one inverter at a time.
Unpacking and incoming inspection
Packaging (cardboard, cellophane, staples, adhesive tape, straps, etc.)
may cause cuts and/or injuries if not handled with care. It should be
removed with the proper equipment.
Packaging must be disposed of in accordance with any local regulations.
When the packaging is opened, conrm the inverter and components are
not damaged and that nothing is missing.
Immediately report any damage or missing parts to the delivery carrier
and to ABB Service.
4
Lifting and transport
To Next Page
Loading...
