Packing list
All components required for installation (listed in the below table) are
shipped with the inverter.
Components Quantity
Bracket for wall mounting 1
M5x10 Wall bracket locking screw (to be used if required) 2
M5 Wall bracket locking washer (to be used if required) 2
(Spare part) T20 screw for front cover 1
Cables for the conguration of the input channels in parallel 1+1
In addition to what is explained in this guide, the safety and installation information provided in the installation manual must be read and followed.
The technical documentation and the interface and management software for the product are available at the website.
XXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXX
ABB solar inverters
Technical documentation 1
To Next Page
Loading...
