ABB UNO-DM-TL-PLUS-US - Safety and Accident Prevention; General Safety Information; Signs and Labels

- 37 -
000632AG
Safety information and instructions
ABB accepts no liability for failure to comply with the instructions for
correct installation. ABB is not responsible for equipment upstream or
downstream from the inverter. .
It is essential to provide installers, operators and maintenance personnel with correct
information. They must therefore read and comply with the information and instructions in the
product manual.
The instructions provided in the product manual do not replace the safety
devices and operation labels on the product, and they do not replace the
safety regulations in force in the country of installation.
Do not use the PV system if any operating anomalies are identied. .
All repairs must be completed by trained ABB authorized service
personnel, using ABB-approved components.
Signs and labels
The labels on the equipment must NOT be removed, damaged, defaced, hidden, etc.
The labels must be regularly cleaned and kept in sight, i.e. NOT hidden
by foreign objects and parts (rags, boxes, equipment, etc.)
The technical data provided in this manual does not in any case replace
that shown on the labels afxed on the equipment.
3
Safety and accident prevention