2 - Characteristics
Models and range of equipment
The device dealt with in this manual is available in a single version
suitable for all countries of installation.
The list of compatible converters and the functions released for each
inverter model is indicated in a separate document “Inverter Compatibility
Matrix” which is available from the ofcial ABB website ( http://www.abb.
com/solarinverters ) in the Monitoring and Communication section
Identification of the equipment and manufacturer
The technical data provided in this manual does not substitute the data
supplied on the labels afxed to the equipment.
The labels afxed to the equipment must NOT be removed, damaged, stained, hidden, etc.,
for any reason whatsoever.
The following information which is useful in identifying the product, is
printed on the printed circuit of the VSN300 Wi Logger Card:
- Manufacturer's Trade Mark
- CE Marking (European Union)
- RCM Marking (Australia)
- FCC ID
The FCC ID is: X6W-3N16E when the device is assembled with the Wi-Fi
radio module supplied by Epcos
The FCC ID is: X6W-3N16M when the device is assembled with the Wi-
Fi radio module supplied by Murata
An FCC ID label is supplied and must be positioned where it is clearly visible on the outside
of the inverter in which the board is installed.
Contains FCC ID: X6W-3N16E
Contains FCC ID: X6W-3N16M
To Next Page
Loading...
