ABB VSN300 - List of Components Supplied

- 19 -
000462EG
4 - Lifting and transport
List of components supplied
The following components are supplied with the device and are required
to correctly install and connect the inverter
Main components Quantity
Locking screw 1
Plastic locking nut 1
Adapter kit (gasket and adapter) 1 + 1
Spacer for installation on inverters equipped
with Arc Fault device
1
Antenna connection cable 1
Wi-Fi Antenna 1
Cable clamp 1
Contains FCC ID: X6W-3N16E
/
Contains FCC ID: X6W-3N16M
FCC ID label 1
ABB
VSN300 WIFI LOGGER CARD
SN: YYWWSSSSSS
MAC: XX:XX:XX:XX:XX:XX
PRODUCT KEY: XXXX - XXXX - XXXX - XXXX
Identication label 1
In addition to what is explained in this guide, the safety and installation information provided in the installation manual must be read and followed.
The technical documentation and the interface and management software for the product are available at the website.
XXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXX
ABB solar inverters
Technical documentation