Abbott FreeStyle - Performing a Blood Glucose Test; Meter Activation and Sample Collection

10
Performing a Blood Glucose Test
1. Remove test strip from vial.
2. Insert test strip to turn meter on.
Note: The meter turns o after 2 minutes of inactivity.
Remove and reinsert the unused test strip to restart
the meter.
If the meter does not turn on, go to Troubleshooting section.
3. Conrm System Check Screen.
• This display appears when you turn on the meter. Do not use the meter if
the display check screen does not exactly match the example. Contact
Customer Care.
• See The FreeStyle Freedom Lite® Meter and How It Works section for more
information.
• If the system check screen does not appear, go to Troubleshooting section.
4. Obtain a blood drop.
When the
and appears, use the lancing device to obtain a blood drop.
(See FreeStyle® lancing device insert for instructions.)
The test strip requires only a 0.3 microliter of blood for accurate results.
Top
Printed side up
Sample areas
English