Appendix I
SL6
I-2
Under “System Properties” select
“Hardware” and then “Device Manager” .
Under “Other Devices-Video Controller”,
click the right button of your mouse and
choose “Properties”.
Then choose “Driver”. You will see that
the VGA Devices are not recognized.
Exit the Device Manager and insert the SL6 CD-Title into your CD-ROM drive. It should
execute the program automatically. If not, you can go to the CD location and execute the
execution file from the main directory of this CD-Title. After it is executed, the screen
below will appear.
To Next Page
Loading...
