Installing the Motherboard 2-17
User’s Manual
KM1 Lower: PS/2 Keyboard Connector
Attach a PS/2 keyboard connector to this
6-pin Din-connector. If you use an AT
keyboard, you can go to a computer store to
purchase an AT to ATX converter adapter.
You can then connect your AT keyboard to
this connector. We suggest you use a PS/2
keyboard for best compatibility.
KM1 Upper: PS/2 Mouse Connector
Attach a PS/2 mouse to this 6-pin Din-
connector.
USB Port Connectors
This motherboard provides two USB ports.
Attach the USB connector from the
individual device to these connectors.
You can attach USB devices such as a scanner, digital speakers, monitor, mouse, keyboard,
hub, digital camera, joystick etc. to one of each of the USB connectors. You must make sure
your operating system supports this feature and you may need to install an additional driver
for individual devices. Please refer to your device user’s manual for detailed information.
To Next Page
Loading...
