APPENDIX
22
trademarks or registered trademarks of their respective owners. All rights not explicitly
granted here are reserved.
The absence of explicit identification of trademarks used in this manual must not lead to
the conclusion that a name is free from the rights of third parties.
CE certification and compliance declaration
The eMH1 EVSE 803/813 Wallbox carries the CE mark. The respective
compliance declarations can be obtained from
ABL SURSUM Bayerische Elektrozubehör GmbH & Co. KG
on request and are available at
www.abl.de
for download.
Glossary & Definitions
This table lists and explains important abbreviations from the wider eMobility area.
ABBREVIATION DESCRIPTION MEANING
BEV
Battery Electric
Vehicle
Electric vehicle (100% electric use)
DC-RCM
Direct Current
Residual Current
Monitor
Monitoring device for detecting DC fault cur-
rents
GSM
Global System for
Mobile Communi-
cations
Standard for fully digital mobile networks
HEV
Hybrid Electric
Vehicle
Hybrid vehicle (combination of a classic com-
bustion engine and an electric motor with
kinetic energy recovery system)
LED
Light Emitting
Diode
Light-emitting diode
MCB
Miniature Circuit
Breaker
Residual current circuit breaker
OCPP
Open Charge Point
Protocol
Communication protocol between wallbox
and service providers (platform-dependent)
PHEV
Plug-In Hybrid
Electric Vehicle
Plug-in hybrid vehicle (combination of classic
combustion engine and electric motor)