Ableton Push 3 User Manual

Push’s display. When Push is first switched on, the volume of the main
output is selected by default.
Use the Volume Encoder to Adjust the Main Output.
You can cycle through the other volume options by pressing the
encoder. You can tap the Volume encoder to see which volume option it
is currently set to. Hold the Shift button and then turn the Volume
encoder to adjust the volume in smaller increments.
3.2 Hardware Connectivity
Push offers various hardware port connections so you can easily hook
up and use your favorite gear alongside it.
3.2.1 Connecting MIDI Devices
You can connect class-compliant MIDI devices to the USB-A port, or
connect MIDI Type A 5-pin socket to 3.5 mm cables to the MIDI In and
Out ports.
3.2.2 Connecting Pedals and CV Out
7/29/23, 9:32 AM
Page 24 of 193

Ableton Push 3 Specifications

General

Type	MIDI Controller / Standalone Instrument
Standalone Mode	Yes
Sample Rate	Up to 96 kHz
Bit Depth	24-bit
Pads	64
Display	Full-color
Connectivity	USB, MIDI I/O
Power	external power supply
Storage	Internal SSD
Software	Ableton Live
Compatibility	Ableton Live 11.3 or later
Processor	Intel-based processor (specific model not disclosed)