Ableton Push 3 User Manual

3.1 Audio Connectivity
Push has a built-in audio interface that can also be used with Live.
Connect Push to your computer using the USB-C cable and open Live’s
Audio Preferences. You can then select Push as an input or output
device.
Select Push in the Audio Input or Audio Output Device Chooser.
3.1.1 Connecting Speakers and Headphones
You can connect your studio monitors to Push using the Out 1 and 2
ports. Use Out 1 for the left speaker and Out 2 for the right.
Connect your headphones to the Headphones port.
Both Out ports and the Headphones port are 6.3mm.
3.1.2 Adjusting Volume
You can adjust the main output (Out 1 and 2), headphones output,
Master track, and Cue volume using the Volume encoder to the left of
7/29/23, 9:32 AM
Page 23 of 193

Ableton Push 3 Specifications

General

Type	MIDI Controller / Standalone Instrument
Standalone Mode	Yes
Sample Rate	Up to 96 kHz
Bit Depth	24-bit
Pads	64
Display	Full-color
Connectivity	USB, MIDI I/O
Power	external power supply
Storage	Internal SSD
Software	Ableton Live
Compatibility	Ableton Live 11.3 or later
Processor	Intel-based processor (specific model not disclosed)