Ableton Push 3 User Manual

In most cases, Link will work without issues as soon as it is enabled and
will provide reliable synchronization under all conditions. If you run into
any issues, we recommend checking out this Link Troubleshooting
FAQ.
4 Building A Live Set
You can create an entire Set, from adding tracks and devices to setting
the tempo and meter, directly on the hardware.
4.1 Using the Browser
To add tracks or browse and load devices, press the Add button at the
right of the display to enter Browse Mode.
The Add Button.
7/29/23, 9:32 AM
Page 27 of 193

Ableton Push 3 Specifications

General

Type	MIDI Controller / Standalone Instrument
Standalone Mode	Yes
Sample Rate	Up to 96 kHz
Bit Depth	24-bit
Pads	64
Display	Full-color
Connectivity	USB, MIDI I/O
Power	external power supply
Storage	Internal SSD
Software	Ableton Live
Compatibility	Ableton Live 11.3 or later
Processor	Intel-based processor (specific model not disclosed)