Absen A Series - Page 18

A series user manual
17 / 24
Service Hotline:400-700-3278
4.1.3 Front maintenance of the power box
Step
❶ Confirm the position of the power box and
remove the 6 modules of the power box
❷ Use a PH2 Phillips screwdriver to remove the
6 screws of the power box
Picture
Step
❸ Lift the bottom of the power box first, and
then tilt it forward on the operating platform
❹Open the cover of the power box to maintain
the receiving card, power supply, and Hub Card
inside the control box
Picture