5.4 Serial Port Settings:
Here you can edit the settings of the RS485 port
The address bit corresponds to the ID of the added camera
RS422 and RS232 is not required.
6 Maintenance and cleaning
6.1 Function test
Check the technical safety of the product regularly, e.g. damage to the housing.
If it can be assumed that safe operation is no longer possible, the product must be taken out of
service and secured against inadvertent operation.
It is to be assumed that safe operation is no longer possible if
• the device shows visible damage
• the device no longer works
• a longer period of storage under the most unfavourable conditions has occurred
• the device was exposed to stress during transport
Please note:
The product is maintenance-free for you. There are no components inside the product
that need to be checked or maintained - never open it.
To Next Page
Loading...
