Abus TVAC26030 - Dvr by Ip

12
4.3.2 DVR by IP
Connecting the control panel to an NVR or DVR via network
DEV:0
Key:
Example: 1: Add a NVR/DVR via web interface
2: Go to the "DVR by IP" menu on the control panel
3: Enter the ID of the added NVR/DVR on the control panel and
then click DEV
Function
Description
DEV
To control a NVR/DVR, you must enter the ID
of the NVR/DVR. The ID is assigned
automatically and can be read in the web
interface of the keyboard.
Key
Here you can see the input of the control panel
Here a NVR/DVR with ID 1 has been added
DEV:1
Key: