11
The live view starts automatically after the unit is switched on.
This view offers the possibility of displaying or executing live images and camera
commands from all connected cameras on the recorder.
• By double-clicking the left mouse button, you can display the respective
camera image in full screen or switch back to the original view.
• With a click of the right mouse button, you can hide and show the menu
structure to display only the respective camera layout as a full screen.
The live view is divided into the following functional areas:
Selection of the configuration and operating menus
Select and search for cameras
Selection of camera commands and actions of the selected
camera
Controlling the view on the local monitor
In the live image, the current recording status is always
displayed (top right) in the form of a coloured R ("Record"). Each
video channel can have one of the following three statuses:
No recording programmed, no hard disk
available, no event
Event alarm (
e.g. in case of movement)
To Next Page
Loading...
